How to setup the audiometer

Step 1) Set up the audiometer

1. On the Front Panel:
  1. Click the power button
  2. Insert the cords into the audiometer as shown in the visual below (from left to right):
    1. Input: Insert the patient clicker
    2. Left (Blue Circle): Insert the Blue headphone jack
    3. Right (Red Circle): Insert the Red headphone jack
2. If pairing the device via USB, turn the device to the back panel
  1. Plug the provided USB cord into the device and insert the other end into your computer.
After all cords are connected, the light on the top panel should pulse cyan blue. You can now proceed to the Audiogram Set Up Page within the Soundtrace app.

If you require further assistance or have questions, feel free to contact our team; we are here to help; support@soundtrace.com

Setting up the audiometer is quick and easy, taking less than a minute. To start on the power button. Next, connect the patient clicker and headphones. If pairing USB connection, plug in the cord into the audiometer and then into your computer